The one-minute pre-ride check that prevents roadside stops
Most roadside problems were checkable in the driveway. Garagely's pre-ride checklist puts tire pressure, spoke tension, bolts and fasteners, levers and controls, and whatever is due, right in front of you, before you roll out.
Garagely's pre-ride checklist is a tap-to-tick list you run before you ride: tire pressure, spoke tension, bolts and fasteners, levers and controls by default, plus any part that is due or overdue for service shown first. Tick items off, see progress as you go, and finish with a saved check in your history, even offline.
What a skipped check costs you
- A soft tire or a loose bolt is a five-second check in the driveway and a roadside problem twenty minutes into a ride.
- A part that is already overdue for service is easy to forget about until it fails mid-ride, not before you leave.
- Small issues compound - a loose lever or a dragging chain left unchecked can turn into a bigger repair, or a real safety issue.
- Without a routine, the check only happens when something already feels wrong, which is too late for the things that fail silently.
Myth vs reality
The myth
I would notice if something were wrong before I left.
Why people believe it
A bike usually still starts and moves even with a soft tire or a part past its interval, so nothing feels obviously wrong at a glance.
The reality
Tire pressure, spoke tension and fastener torque do not announce themselves. The bike can look and sound fine right up until one of them causes a problem on the road.
What to do instead
Run the same short checklist every time, in under a minute, so the check does not depend on remembering or noticing.
Riders like you
Rides the same route every morning and had stopped really looking at the bike before leaving.
The pre-ride checklist takes under a minute and now runs before every commute, catching a slow-leaking tire before it became a roadside fix.
Rides with friends who wait on him, so a missed check before a ride means everyone loses time if something goes wrong on the road.
A quick tick-through before rolling out means overdue items show up before the group even leaves the driveway.
How the pre-ride check works, step by step
- 1
Open the checklist
Any part that is due or overdue for service shows first, so what needs attention is never buried at the bottom.
- 2
Start from sensible defaults
Tire pressure, spoke tension, bolts and fasteners, and levers and controls are checked by default - a sane starting list.
- 3
Tap to tick each item
Go through the list and tap what you have checked; a progress bar fills in as you go, for example "3 of 4 done", so you always know where you stand.
- 4
Finish and see "Ready to ride"
Once everything is ticked, the checklist confirms the bike is ready to ride.
- 5
Customize the list to your bike
Add, rename or reorder items so the checklist matches what actually matters on your bike, not a generic template.
- 6
Skip an item if you need to
Finish the check even with items left not-checked - it still saves to your history so there is a record of what was and was not done.
- 7
Works with no signal
The whole checklist runs offline, so a garage with no reception or a remote trailhead does not stop you from running it.
Before and after
Without Garagely
- Checking the bike before a ride depends on remembering to do it.
- Overdue service items are easy to miss until something fails.
- There is no record of what was actually checked before a ride.
With Garagely
- A tap-to-tick checklist takes under a minute before every ride.
- Due and overdue items show first, so they are never missed.
- Every check saves to your history, even the ones left not-checked.
What is free, what is Pro
Free
- Pre-ride checklist with default items for tires, spokes, fasteners, controls
- Add, rename and reorder items
- Works fully offline
Pro
Nothing here needs Pro.
Questions riders ask
Is the pre-ride checklist free?
Yes, the pre-ride checklist is free and works fully offline.
What does the checklist cover by default?
Tire pressure, spoke tension, bolts and fasteners, and levers and controls, plus any part that is currently due or overdue for service.
Can I change what is on the checklist?
Yes, you can add, rename and reorder items so the list matches your bike and your habits.
What happens if I skip an item?
You can finish the check with items left not-checked. It still saves to your history, so there is a record of exactly what was checked and what was not.
Does the checklist need a connection?
No, it works fully offline, so a garage or trailhead with no signal does not stop you from running it.
Related features
Tire tracking
Pressures, tread, install date and wear for front and rear - so you change rubber on condition, not on a hunch.
Proactive reminders that just work
Get told what is due before it bites - by engine hours, mileage, or date. The reminder you would have forgotten is the whole point.
Troubleshoot by symptom
Offline fix-it guides plus guided diagnostics online: symptom, likely cause, quick checks and the fix, with safety flagged.
Catch the small thing before it strands you
Run a one-minute checklist before your next ride, free.
New to Garagely? Start today
Scan to download
Also available on Google PlayAlso available on App Store