Garagely

2023 Beta 300 RR suspension sag & service guide

By the Garagely suspension teamUpdated 2026-07-28

For the 2023 Beta 300 RR (enduro / off-road), aim for fork rider (race) sag of 30-33% of travel and fork static sag of 10-15%. At the rear, target shock rider sag of 30-35% and shock static sag of 10-15%. These are percentage-of-travel starting points for the bike's discipline, not exact millimetre settings. Set sag first, then fine-tune the clickers from the stock baselines below, and re-check after any change.

Starting points, not exact settings. Sag targets and spring-rate estimates are reference values that vary by rider weight, model, and conditions. Verify against your owner's manual, dial them in to your own feel, and re-check after any change. Suspension affects handling and safety; consult a qualified suspension technician if unsure.

Specification and setup data below is provided in English from the shared knowledge base; numbers are not translated.

Suspension sag targets

Fork (front)

Rider (race) sag
30-33%
Static (free) sag
10-15%

Shock (rear)

Rider (race) sag
30-35%
Static (free) sag
10-15%

Source: Suspension tuning reference (sag-first method; Race-Tech-style spring estimate).

Adjuster baselines

ComponentAdjusterStock baselineRange
forkcompression10.0 clicks5.0-18.0 clicks
forkoil level120.0 mm100.0-135.0 mm
forkpreload9.0 turns4.0-16.0 turns
forkrebound10.0 clicks8.0-20.0 clicks
shockcompression hs19.0 clicksn/a
shockcompression ls21.0 clicksn/a
shockrebound17.0 clicksn/a

Starting points, not exact settings. Sag targets and spring-rate estimates are reference values that vary by rider weight, model, and conditions. Verify against your owner's manual, dial them in to your own feel, and re-check after any change. Suspension affects handling and safety; consult a qualified suspension technician if unsure.

Service intervals

ServiceMileageHoursTime
airn/a30.0 hn/a
braken/an/a730 d
brakepad frontn/a30.0 hn/a
brakepad rearn/a30.0 hn/a
chainn/a30.0 hn/a
coolantn/an/a730 d
forkn/a40.0 hn/a
fuelsys carbn/a30.0 hn/a
gearboxn/a30.0 hn/a
spoke frontn/a30.0 hn/a
spoke rearn/a30.0 hn/a

Starting points, not exact settings. Sag targets and spring-rate estimates are reference values that vary by rider weight, model, and conditions. Verify against your owner's manual, dial them in to your own feel, and re-check after any change. Suspension affects handling and safety; consult a qualified suspension technician if unsure.

Key specifications

Engine oil
Motul Transoil Expert 10W40 (transmission/gearbox); Motul 710 2T (injector oil, for standard model with oil injection); Motul 800 2T (premix, Race Edition only)
Oil capacity
800 ml
Coolant capacity
1300 ml
Tire sizes
90/90-21140/80-18
Stock fork spring
4.2
Stock shock spring
5.2
Fuel capacity
9.5 L
Spark plug
NGK GR7CI8

Starting points, not exact settings. Sag targets and spring-rate estimates are reference values that vary by rider weight, model, and conditions. Verify against your owner's manual, dial them in to your own feel, and re-check after any change. Suspension affects handling and safety; consult a qualified suspension technician if unsure.

Calculate your exact sag

Measure your bike, enter the numbers, and the free calculator checks your sag against this model's target band.

Open the sag calculator

Track this setup in the app

Save your sag and clicker settings, get per-model targets, and log every change over time.

Get the app

More setup guides