Dropped your motorcycle? What to check before you ride it again
By Garagely editorial team, Motorcycle maintenanceUpdated 2026-10-18
On this page: Checklist · 16 steps, Before you start, Lift the bike safely, Check fluids and fuel, Check controls and steering, Check wheels, brakes and frame, By bike type, When to call a mechanic, Log the drop, Frequently asked questions
Before you ride a dropped motorcycle, photograph the damage, then check for fluid leaks and cracked cases, bent levers and pedals, forks and a front wheel that sit straight, wheels that spin freely, working brakes and a throttle that snaps shut. Start it standing still, then take a slow test loop. If steering, brakes or the frame are in doubt, do not ride it.
Checklist · 16 steps
Photograph the bike where it fell, and the ground around it, before lifting
Why: Photos taken before anything moves show the damage as it happened, for a claim or for your own record.
Switch the ignition off and close the fuel tap if one is fitted
Why: Fuel can weep from a fallen bike, and nothing should run or spark while you work around it.
Ask for help and lift with your legs, not your back
Why: A motorcycle is heavy and awkward, and a second drop or a strained back adds to the damage.
Look under and around the engine for oil, coolant and fuel leaks
Why: A fresh fluid trail points to a cracked case, a split hose or a damaged fitting.
Inspect engine cases and covers for cracks, gouges and missing pieces
Why: A scuff that has not gone through is cosmetic; a crack or hole can lose oil quickly.
Check levers, pedals and handlebar ends for bends, cracks and free movement
Why: A bent brake or clutch lever can fail when you grab it, and the part is cheap next to a crash.
Sight along the forks and check the front wheel sits straight
Why: A bent fork tube or twisted bars show up as a wheel that is off-center before they show up on the road.
Wipe the fork tubes, look for dents or oil, and compress the front
Why: A dented tube cuts the seal later, and a fork that sticks mid-travel is bent or binding.
Spin each wheel and check the rims, discs, calipers and brake feel
Why: A wheel that wobbles or drags, or a bent disc, is a safety fault, not a cosmetic one.
Check the throttle snaps shut, and the switches, horn and lights work
Why: A tip-over can jam a throttle or crack a switch housing; electrical faults show at the first start.
Look at the steering head, subframe, footpeg mounts and swingarm for cracks
Why: Frame damage is a safety fault, and cracked paint beside a weld can hide a cracked weld.
Start the engine standing still, then ride one slow loop on a quiet road
Why: Listening first and riding slowly lets a fault show itself at low speed and low risk.
Tow or truck the bike if anything affecting steering or brakes is unclear
Why: Riding home with a doubtful front end or brake risks a second, bigger crash.
Log the drop, the damage you found and every repair, with photos
Why: One dated record serves an insurer, a future buyer and your memory of what was replaced.
Inspect the battery pack casing, high-voltage cables and charge port for damage
Why: A damaged pack or exposed cable is a hazard; follow the maker's guidance before powering it.
- Electric
Check body panels, the drive cover and the engine mounts for cracks
Why: On many scooters the engine and drive sit in a swingarm unit that a fall can crack or shift.
- Scooter
Before you start
Put on gloves and sturdy boots before you touch a fallen bike: it may have hot parts, sharp broken plastics and fuel on it. Before you lift anything, take photos of how the bike lies, the ground around it and every visible scuff. Those photos are the baseline for every check below, and for an insurer if you later decide to claim.
Have a flashlight, a rag and the owner’s manual to hand, and do not rush. If you want a guided pass, the used-bike inspection tool in Garagely also covers brakes, chassis, wheels and electrics: pick your category, skip the paperwork section and tick items off as you go.
Lift the bike safely
Switch the ignition off, and close the fuel tap if your bike has one. A bike on its side can weep fuel from the cap or breather, so mop it up with a rag and keep sparks and heat away.
Get a helper if you can. A common technique is to turn your back to the seat, bend your knees and push up with your legs, but the right method depends on the bike’s weight and which way it fell. If your manual covers lifting, follow it, or ask a dealer to show you a method for your model. If you cannot lift it without strain, wait for help. On soft ground, put something flat under the stand.
Check fluids and fuel
Once the bike is upright, look underneath with the flashlight. Fresh oil, coolant, fuel or brake fluid points to a damaged part. Follow the engine cases, the clutch and alternator covers, the water pump, the oil filter and the radiator hoses. A cracked case or cover is a repair, not a ride home. A scuff that has not gone through the metal is cosmetic.
Check fluid levels against the marks in your manual. Look at the brake and clutch reservoirs too: a cracked cap or a level that has dropped suggests a leak at a hose or a lever.
Check controls and steering
Start with the parts that hit the ground first: levers, footpegs, pedals, handlebar ends and mirrors. Look for bends and cracks, and check that the brake and clutch levers move freely. A bent lever or pedal is a replacement to price. Ask a mechanic before bending anything back.
Then check the steering. With the front wheel off the ground, turn the bars lock to lock. They should move smoothly, with no notchy spots. Stand in front and sight along the front wheel and forks: the tubes should look parallel and the wheel should be centered between them and in line with the rear wheel.
Wipe each fork tube and look for dents, scratches and oil. A dent where the seal passes will leak sooner or later. Press the front down a few times; it should rebound without sticking. Then twist the throttle and let go: it must snap shut. Test the kill switch, horn, lights and indicators.
Check wheels, brakes and frame
Spin each wheel with it off the ground if you can. It should run true and turn freely without a scraping sound. Look for dents or cracks in rims, bent spokes and a bent or scored brake disc. Check that the chain sits on both sprockets. Squeeze the front brake and press the rear pedal: a spongy lever, or one that travels to the grip, needs a mechanic before you ride.
Next, the frame. Look at the steering head, the subframe, the footpeg mounts and the swingarm, especially in the paint around welds. A bent frame, subframe or swingarm is not a DIY repair, and it usually ends the ride.
If every check passes, start the engine standing still and listen for new noises or warning lights. Then ride one slow loop on a quiet road, braking and steering gently, and look again for leaks and loose fasteners when you get back.
By bike type
- Enduro and adventure: check spokes, the rim lock, hand guards, the skid plate and radiator guards, and look for fork tubes scratched by rocks.
- Sport and street: look at clip-on bars, rearsets, the shift lever and the fairing stays for cracks, and inspect any crash sliders.
- Cruiser and touring: check highway bars, floorboards, the shifter, the brake pedal and the exhaust mounts.
- Scooters: body panels hide a lot, so look behind them for cracks in the drive cover, engine mounts and rear shock mount.
- Electric: inspect the battery casing, high-voltage cables and charge port. If you see damage, a smell or a warning on the dash, do not charge or ride it and follow the maker’s guidance. High-voltage work belongs with a qualified technician.
When to call a mechanic
Do not ride, and have the bike checked or trucked, when the front end is not straight, the brakes feel spongy or drag, a case or the frame is cracked, or a leak is not explained. Also ask for a quick check after a fall at speed or on a hard surface. Steering, brakes and frame are safety items: a checklist helps you find a problem, but a qualified mechanic decides it is fine.
Log the drop
Write down what happened: the date, the odometer reading, how the bike fell, the damage you found and every part you replace. Garagely’s service log takes a dated entry with the parts, the reading, DIY or shop and the cost, and on Pro you can attach one photo to each entry.
If you plan to claim, read your policy and call the insurer before you repair anything. Whether a tip-over is covered, and above what deductible, depends on the policy and the country. When you sell, a dated record of the drop and the repair is better than silence; see how to prepare a motorcycle for sale. If the bike is under warranty, keep the repair receipts too: records that count for a warranty.
Keep it going in the app
Add a service-log entry in Garagely for the drop and each repair, with the parts, odometer reading and cost, and attach a photo to each entry (Pro).
New to Garagely? Start today
Scan to download
Also available on Google PlayAlso available on App StoreFrequently asked questions
Does a dropped motorcycle affect the warranty?
A warranty covers defects as its booklet defines them, and accident damage is normally treated differently from a manufacturing fault. Read the booklet's exclusions, ask the dealer before you repair, and keep the repair records.
Do I have to tell a buyer the bike was dropped?
Disclosure duties vary by country and by how the sale is made. Check your local rules, and expect a buyer who finds an undisclosed repair to trust the rest of what you said less.
Can a drop damage a bike that looks fine?
Yes. Bent forks, a twisted frame member or a hairline crack in a case can hide behind unmarked paint. Signs that show up only at speed, such as a pull to one side, a wheel off-center while riding straight or a new vibration, call for a wheel-alignment or frame check at a shop.
Is it worth fixing a dropped bike myself?
Replacing a lever, mirror or footpeg is a reasonable first DIY job if you follow the manual. Anything touching the frame, forks, brakes or a cracked case belongs with a qualified mechanic.
Sources
- Manufacturer owner's manuals - fluid levels, controls, brake and fork inspection, service limits
- Your insurance policy and warranty booklet - what a tip-over claim or accident damage covers (varies by insurer and country)