Garagely

When to replace motorcycle tires: tread depth, age and DOT code

By Garagely editorial team, Motorcycle maintenanceUpdated 2026-10-18

On this page: Checklist · 16 steps, Before you start, Tread depth, DOT date code, Age limits, Damage and signs of aging, By bike type, When to call a mechanic, Log each tire, Frequently asked questions

Replace a motorcycle tire when the tread reaches the wear indicator, when it has structural damage such as a sidewall bulge, exposed cord or a cut through the casing, or when it reaches the age limit your tire maker gives. Michelin, for example, says 10 years from the DOT date code whatever the tread, with a yearly professional check once a tire has five years in use.

Checklist · 16 steps

  1. Find tire size, pressure and replacement guidance in your owner's manual

    Why: The manual and the tire maker set the figures for your bike; a general rule cannot.

  2. Check both tires cold, before the ride, in good light

    Why: A cold tire gives a true pressure reading, and daylight shows cracks and cuts you would miss in a garage.

  3. Locate the tread wear indicators in the main grooves of each tire

    Why: The indicators mark the wear point the tire maker designed into this tire, so they beat guessing by eye.

  4. Replace the tire before the tread wears down to the indicator

    Why: Michelin advises changing before this point; beyond it, grip is not guaranteed, particularly in the wet.

  5. Measure tread depth with a gauge at several points across each tire

    Why: Tires wear unevenly across their width, so one reading in one spot can hide the worn part.

  6. Look for flat spots, scalloping or cord showing through the rubber

    Why: Exposed cord is one of the structural signs Michelin lists as a reason to replace.

  7. Inspect both sidewalls for bulges, cuts and cracks all the way around

    Why: A sidewall bulge or a cut through the casing is a reason to replace the tire, whatever the tread.

  8. Check the tread for nails, glass or stones pushed into the rubber

    Why: An embedded object can work deeper and cause a slow leak or damage the casing.

  9. Find the full DOT code and read the four-digit date at its end

    Why: Under 49 CFR 574.5 the last four digits are the week and year of manufacture.

  10. Work out each tire's age in years from its week and year

    Why: Front and rear are often fitted at different times, so each has its own age.

  11. Look up the age guidance your tire maker publishes for your tire

    Why: Makers publish their own figures; Michelin's ten years from manufacture is one example, not a universal rule.

  12. Book a professional check every year once a tire has five years in use

    Why: Michelin says rubber ages from ozone, heat and UV in ways you cannot see from the outside.

  13. Set cold pressure to your manual's figure before riding, not after

    Why: Pressure rises as a tire warms, so a hot reading is not the cold figure your manual gives.

  14. Check the DOT date on a new tire before you pay for it

    Why: Age is counted from manufacture, so a tire that sat in stock has already used part of its life.

  15. Check dirt tire knobs for tearing, rounding and missing blocks

    Why: Worn or torn knobs lose traction in mud and loose ground even when the carcass is fine.

    • Enduro / Dual-Sport
  16. Record tread, cold pressure and DOT date for front and rear

    Why: Dated readings show how fast each tire wears and when it reaches its age limit.

Before you start

Have your owner’s manual at hand for the tire size, the cold pressure and any replacement guidance, and borrow or buy a tread depth gauge. Check the tires cold, in daylight, with the bike upright so you can turn each wheel and see the whole tire. A stand makes this easier but is not required.

Garagely’s tire pressure tool covers the pressure side of tire care. This page covers the other question: when a tire is finished, whether the reason is wear, damage or age.

Tread depth

Most motorcycle tires have tread wear indicators, small raised bumps at the bottom of the main grooves. When the rubber is level with them, the tire is worn out. Michelin advises changing the tire before it reaches the indicator, because past that point grip is not guaranteed, particularly on wet surfaces. For scale, FMVSS 119 S6.4 (49 CFR 571.119) has motorcycle tire indicators show at 0.8 mm (1/32 inch). That is the indicator standard, not a legal riding minimum.

Legal minimum tread depths vary by country, so look up the rule where you ride rather than relying on a figure from another market. The tire maker’s indicator is a better trigger than a legal minimum, because it is built into the tire you own.

A gauge adds detail the indicator does not. Measure at several points across the tread, because the center and the shoulders wear at different rates depending on how you ride. Judge the front and the rear separately; each has its own wear, and one worn tire does not mean the other is done.

DOT date code

Every tire sold under the US system carries a tire identification number starting with DOT. Under 49 CFR 574.5 its last group is a date code of four digits: the first two give the week of manufacture and the last two the year. The regulation’s own example: 0109 means the first full calendar week of 2009.

Read it on each tire, not once for the bike, because front and rear are often fitted at different times. If you are looking at a used bike, the date code is one of the quickest ways to tell how old the rubber is, which the used bike checklist covers alongside the rest of the inspection.

Age limits

Rubber ages even when a tire is not worn. Michelin says it degrades from ozone, heat and UV exposure in ways you cannot see from the outside. Its guidance is to replace a tire at 10 years from the manufacture date on the DOT code, whatever tread remains, and to have a professional inspect it every year once it has five years or more in use.

Michelin also notes that tires that have never been used, or only rarely, can still show signs of aging, so a spare or a tire on a bike that barely moves is not exempt. Other tire makers and bike manufacturers publish their own figures, and they are not all the same. Find the guidance for your tire and your bike. Where two sources disagree, the shorter figure is the safer one to follow.

Damage and signs of aging

Age and tread are only two triggers. The third is damage, and it can end a tire’s life at any age or depth. Michelin lists a sidewall bulge, exposed cord and cuts through the casing as reasons to replace. Cracks in the tread, on the shoulders or on the sidewalls are signs of aging that a professional should assess.

Check for objects too: a nail, glass or a stone pushed into the tread. Some work in deeper over time and cause a slow leak. After hitting a pothole or curb, look at the sidewall on the affected side before the next ride, and treat a new vibration as a reason to stop and look.

By bike type

  • Dirt and enduro: knobs tear, round and fall off long before a road tire reaches an indicator. Check them after each ride and ask your tire maker how much knob wear is acceptable.
  • Adventure bikes: a mixed-use tire wears in two ways, on pavement and off it. Check the tread across its whole width and read the maker’s guidance for your pattern.
  • Scooters: small tires carry the same DOT code. Read the date on yours, because scooters that are used a little can age more than they wear.
  • Electric: the manual names the tires and pressures for your model. Follow it, and judge wear, damage and age exactly as on any other bike.
  • ATVs and sport quads: some off-road tires carry no DOT code at all. If yours do not, rely on the tire maker’s own age marking or guidance and on your inspection of the rubber.

When to call a mechanic

Take the bike to a tire shop if you find a bulge, a cut, exposed cord or cracks, if a tire keeps losing pressure, or if you feel a new vibration or wobble after an impact. A shop can also read a date code you cannot find, fit the tire, and balance the wheel. If a tire has passed five years in use, a professional inspection is Michelin’s advice, even when it looks fine. If you are unsure, the answer is to ask, not to ride on it.

Log each tire

A tire has three numbers worth keeping: tread, cold pressure and the DOT week and year. The tires feature in Garagely (Pro) records all three for each tire and shows Good, Worn or Replace for the front and the rear, so you are not working from memory when you decide.

Tires age by time as well as by use, like brake fluid, so check both when you prepare the bike for a new season.

Keep it going in the app

Log tread, cold pressure and the DOT week and year for each tire in Garagely's tires feature (Pro), and get a Good, Worn or Replace verdict for front and rear.

Frequently asked questions

Should I replace both tires at the same time?

Judge each tire on its own wear indicator, damage and age. Front and rear usually wear at different rates. If your manual or tire maker names a matched front and rear combination, check that before you buy just one tire.

What if I cannot find a date code on the tire?

Look at the other sidewall of the wheel. The standard requires the full code on one sidewall, so the date is often molded on only one side. If there is still no four-digit date, a tire shop can help read it, and an unreadable date is a reason to treat the tire as old.

How old can a new tire be when I buy it?

Read the four-digit date code at the shop and ask for a fresher tire if the code is old. A tire gets older from the week it was made, not the day you fit it, and you are paying for the years it has left.

How often should I inspect my tires?

Michelin recommends a weekly look at the state of the tires, the tread depth and any damage. Add a cold pressure check before rides and an extra look after hitting a pothole, curb or debris.

Sources

More in this cluster